This is my 3rd design of adaptors to improve the usability of LaserPecker’s Auto Stand.
Although the laser window in the engraver seems a slim, long shape, with careful placements, the engraver can be rotated 90 degrees and still produce the full 100*100mm engraving range through the slim hole in the auto stand.
Although this one does not move the engraver further away from the pillar of the auto stand, by allowing the engraver to face 3 different ways, you can actually avoid the pillar and engrave on most large objects.
Part
- 3D printed 3-way adaptor (stl file)
- need support, either side up is fine
- 15% infill, 0.2mm layer height
- only takes about 4.2m of filament and 1h15min to print
Usage
Was this helpful?
3 / 0