This only applies to LP2 and newer models.
In case of firmware update failure or issues with a new firmware, you can easily rollback to the factory firmware by one of the two methods described below depending on the version and model of your LP:
Method 1
1) Unplug power from your LP
2) Plug in power to your LP and immediately press and hold the two circular touch buttons on the top of your LP until a red light comes up.
3) Release the buttons. The red light will go off and a blue light should start to flash.
Reset completed.
Method 2
1) Unplug power from your LP
2) Plug in power to your LP and immediately press and hold the “Play” button on the top of your LP until a red light comes up.
3) Release the buttons. The red light will go off and a blue light should start to flash.
Reset completed.
Note that the factory firmware version may be different from batch to batch. It will be the most up-to-date stable version at the production time. For example, some will reset to v3.0.1 and some to v3.1.0.
Was this helpful?
4 / 38